Vectaire E-Smile Continuous Running Low Energy Extractor Fans

by Vectaire
£177.00 includes VAT
Description
Delivery Costs & Timescales
Return or Cancel An Item
Reviews
Description
  • provides low level continuous ventilation to control condensation
  • 3 speed axial fan
  • powerful low profile unit
  • choice of two low speeds at installation
  • wall or ceiling
  • low noise levels
  • low running costs
  • for any domestic wet room
  • complies with Building Regulations Parts L1A 2013 and F 2013
  • SAP PCDB Listed

General

  • exhausts directly to the outside or through medium length ducting - up to 8m)
  • sfp down to 0.37 W/l/s
  • runs continuously at pre-selected choice of two speeds (fixed at installation)
  • Speed 1 operates at 11 l/s (factory set)
  • Speed 2 operates at 14 l/s
  • speed boosted to maximum (21 l/s) using integral pull cord or by:
    • remote switch/light switch
    • PIR sensor
    • DRH240 (dynamic remote humidistat)
  • easy and economical to install and maintain
  • ES1003 design allows installation at any angle with only three fixing points
  • energy saving ventilation
  • extremely low running costs
  • low carbon footprint
  • 2 year warranty
  • Vectaire Ltd can supply all accessories for use with these units, including fire dampers, air valves, ducting, outside grilles, wall cowls and window kits. Additionally, Vectaire offers a design service to ensure that the unit installed is the best possible to provide efficient, effective, low energy and low running cost ventilation. Vectaire can also organise installation, commissioning and maintenance of these products
  • These fans are NOT suitable for use with Gravity Grilles. They should be installed using either Cowls or Fixed Grilles. Only approved accessories should be used.

Specification

  • constructed using recyclable and/or reusable materials and components for minimum ecological impact
  • shockproof, high quality technopolymer casing
  • designed using latest wind tunnel technology and CFD simulations
  • advanced profile to increase aerodynamic efficiency
  • induction motor with thermal protection
  • 40,000 hour life motors with maintenance free and long life ball bearings
  • operates in ambient temperatures up to 40ºC
  • double insulated - no earth required
  • IPX4 Splashproof rated - can safely be installed in Zones I and II

Compliance

  • Part L1A 2013 of Building Regulations for enhanced energy saving capability
  • Part F 2013 of Building Regulations for reliable, efficient ventilation
  • EU RoHS Directive Compliant.
  • Complies with IEC60335-2-80, LVD2006/95/CE and EMC2014/30/UE (European Directive against radio interference and electro-magnetic compatibility
  • CE marked
  • SAP PCDB Listed
  • Energy Saving Trust Best Practice Compliant

Range

  • ES1003 - 3 speed, cord or remote
  • ES1003CF- model c/w filter
  • ES1003CLV- SELV - 12v model
  • ES100H2C- 2 speed, humidity control
  • ES100H2CLV- 2 speed, humidity control - SELV - 12v model
  • PLT/ES1003 - 20x20cm, E-Smile Adaptor Plate
  • PLT/ES1003-S12 - 25x25cm, E-Smile Adaptor Plate, Centre Hole
  • PLT/ES1003/SIL - 25x25cm, E-Smile Adaptor Plate, Off-set Hole

THESE FANS SHOULD BE INSTALLED WITH EITHER A FIXED GRILLE OR COWL

Typical specification

Supply and Install a Vectaire ES1003 high performance axial fan which has been tested and is SAP PCDB Listed and suitable for ALL domestic wet rooms. The fan is to be suitable for installation either into a ceiling, wall or panel (with the appropriate accessories). The fan is to be continuous running at its low speed (from a choice of two lower speeds) and be capable of being boosted to maximum speed by means of an integral pull cord or (with the cord removed) by a remote switch, PIR sensor or humidistat. The fan casing should be made of shock-proof, high quality technopolymer, contain a high magnetic permeability induction motor with maintenance-free, long life ball bearings, and be protected with a thermal cut-out. The fan should be double insulated and be lPX4 splashproof protected suitable for installation into Zones I and Il. The fan is to comply with IEC 60335-2-80, LVD2006/95/CE and EMC O4/108/CE European Directive against radio interference and electro-magnetic compatibility, and be CE marked

Specification
Leaflets
O&M Sheets

Product Information SKU
Vectaire E-Smile Continuous Running Low Energy Extractor Fan with pull cord or remote - 10cm - 3 speed ES1003
Vectaire E-Smile Continuous Running Low Energy Extractor Fan with pull cord or remote - 10cm - 3 speed with removable filter ES1003CF
Vectaire E-Smile Continuous Running Low Energy Extractor Fan with pull cord or remote - 10cm - 2 speed with humidistat ES100H2C
Vectaire E-Smile Continuous Running Low Energy Low Voltage Extractor Fan with pull cord or remote - 10cm - 3 speed ES1003CLV
Vectaire E-Smile Continuous Running Low Energy Low Voltage Extractor Fan with pull cord or remote - 10cm - 2 speed with humidistat ES100H2CLV
Vectaire Eco Continuous Running Low Energy Extractor Fan with pull cord or remote 10cm - 3 speed ECO1003
Vectaire Eco Continuous Running Low Energy Low Voltage Extractor Fan with pull cord or remote 10cm - 3 speed ECO1003CLV
Window Kit (120mm dia hole) ECOWK104
Vectaire Eco - Continuous Running - Low Energy Outside Cowl for Window Kit ECOWK104COWL
Delivery Costs & Timescales

 

 

We charge a single delivery charge per order regardless of the number of items. The amount charged is based on the largest delivery cost i.e. smaller items are usually £10 delivery whereas a bath is typically £29 delivery, if you only have the smaller items you will be charged the £10, however if you then add a bath to your basket the delivery will be £29. Should you add a second bath to your order the charge will still be £29.

To determine your total delivery costs simply add the items you are interested in to your basket and the site will calculate your delivery cost and display it at the bottom of your basket.

Item Type Cost
Small Items £10
Standard Items £15
Baths / Shower Enclosures £29 


Delivery Timescales

We quote a single estimated delivery timescale per order which is determined by the item with the longest lead time. Our smaller products are typically 3-5 working days and the majority of our sanitaryware is 5-7 working days. You may find that specific product options such as colour or finish may increase the estimated delivery time, this is usually as these are a special order and take longer to process or in some cases are made to order.

To determine your estimated delivery timescale simply add the items you are interested in to your basket and the site will calculate your estimated delivery timescale and display it at the bottom of your basket.

Orders are usually only dispatched when all items in your basket are available for delivery. Consider placing separate orders for items with longer delivery timescales. 

Our Warehouse

On occassion you may wish to collect from our warehouse, we are happy to accommodate this however this needs to be made by prior arrangement. Please read through our Further information about our Warehouses.

Return or Cancel An Item

We work hard to provide the highest levels of support to all our customers and have developed a series of forms to report any problem you may have experienced with your order, once completed the forms provide us with sufficient information to start working towards resolving your issues.

Please select the most appropriate option below. 

Incomplete Orders

I have items missing from my order

Problem with my Order

I have a problem with one or more of my items (Damaged, Faulty)

Returning Items

I want to return an Item I ordered Incorrectly

I want to return an Item I no longer require

I have received an incorrect item

I have a problem with one or more of my items (Damaged, Faulty)

 

Cancellations

I would like to cancel part of my order

I would like to cancel all my order

Reviews