Simple Step-By-Step Instructions for Installing a Bidet Toilet Seat
The best way to quickly convert your toilet from a conventional arrangement to a bidet setup is using a bidet toilet seat. It vastly enhances your bathroom experience and improves your hygiene. You can even get bidet toilet seats for sale if you are on a tight budget.
According to several studies, utilising a bidet after urinating or defecating can help minimise the number of germs in your genital and anal areas.
Added advantages include:
- Haemorrhoids are a risk that is lessened by it.
- It results in less tissue being used, which is great for the environment.
- Your bathroom comfort is enhanced.
- It is better for those with restricted mobility who want to clean themselves.
Bidet chairs are quite a large project and extremely different from a single installation, which would require plumbing knowledge. Even though they could have distinct characteristics, installing bidet seats is typical because of their similar structural design.
Here's How To Install A Bidet
What You Will Need
- A bidet toilet seat
- A screwdriver
- A wrench with an adjustable mechanism
- A small bucket and a towel
Step 1: Remove The Existing Toilet Seat
Currently, a pair of two mounting bolts secure your Burlington toilet seat to the rim. You will need a flathead screw to pry open the covers because they may have little plastic coverings on top that could obscure the screws.
Once you can reach the bolts underneath, use the screwdriver to undo them. You could need to descend below the toilet and remove the bolts' retaining nuts. In other cases, the seat bolts are integrated into the seats themselves, making it difficult to detach them from the top. The underneath nuts can only be untied as a solution.
After the bolts and nuts have been taken off, it should be easy to raise the old seat. If you lift the seat, it should come out with ease. To make room for the bidet seat, clean the toilet rim. If your bidet seat model utilises the current seat, you should save it rather than toss it away immediately.
Step 2: Shut-Off Water Supply For The Toilet
Find the shut-off valve first, which should be nearer the floor towards the back of the toilet. The toilet tank's bottom has a supply hose that connects to a water supply pipe on the wall. The shut-off valve links the two and has the shape of an oval.
Rotate it counterclockwise until it can no longer be turned to turn it off. Flushing the toilet will remove any water that remains in the tank.
Step 3: Attach The T-Valve To The Toilet's Current Supply Line
Your bidet seat will be packaged with a T-shaped valve that is fittingly known as the T-Valve. Its job is to switch the water flow between the toilet and the bidet sprayer. Since most parts are plastic, much of the tightening will be done by hand, ensuring that every part fits tightly. You can always use the wrench to tighten any difficult-to-tighten metal fittings.
Remove your supply hose from the tank's underside. As you work, be prepared with the little bucket and towel in case any remaining water leaks.
In the same location where the supply hose was previously attached to the toilet tank, screw the T-valve to the tank's base.
The other end of the T-valve should be connected to the supply pipe.
Step 4: Install The Bidet To The Toilet
A mounting plate is included with your bidet plate. Place it on the seat, so the mounting holes line up with the bolt holes on the rear of the toilet's rim. Some bidet types have a mounting plate made up of the entire unit.
Place the mounting bolts included in the package through the holes when they are suitably positioned. After that, lock the bolt with the nuts underneath the rim to complete the assembly. Depending on the bidet model, the bolts and nuts may be made of plastic or metal. Use your screwdriver or the adjustable wrench on metal.
Push the bidet on the mounting plate pulling it back until you hear it click into place after attaching the plate.
Step 5: Connect The Bidet Seat To The Water Supply
The bidet includes a separate water supply hose. The supply hose's other end should be connected to the connection on the bidet seat. Take one end and insert it into the T-Valve opening on the left.
Verify the tightness of each connection to and from the T-Valve and the bidet water supply. The shut-off valve you had previously turned off at the beginning of the installation process can now be turned on.
The shut-off valve can be opened by turning it in a counterclockwise direction, allowing water to flow to the bidet seat and the toilet tank to fill up. As you secure any relevant connecting points, ensure there are no leaks.
If your bidet is electrical, your bathroom or toilet must have a grounded GFCI channel or a trustworthy extension cord. Connect it, and then check to see if the seat's other features operate as intended. You must be seated on several of the bidet's features to work.
Activate The Bidet
It's time to turn on the bidet after straddling it. Open the valve gently until there is enough pressure to clean your butt. On the remote control of the gadget, there is a wash button that activates a stream of water to help wash the undercarriage.
Please turn it off when you feel that the underside is clean. The nozzle will be cleaned after use if your type has a self-cleaning feature.
It's time to act now that you are aware of how nicely the bidet functions. Using just the tissue paper will spread faeces all over your skin, which is a problem with the status quo—good old toilet paper.
It simply doesn't do the job. However, if the toilets for sale do not have a drying feature, you may need to dry yourself before putting your pants back on.Come and join us at Nationwide Bathrooms which is the right bathroom online store for the right bathroom supplies online in the United Kingdom.